 产品分类 |
|
您当前的位置： 首页 » 供应产品 » marsh bellofram过滤调压阀
 点击图片查看原图 |
|
| 产品： |
浏览次数：133marsh bellofram过滤调压阀 |
| 单价： |
面议 |
| 最小起订量： |
|
| 供货总量： |
|
| 发货期限： |
自买家付款之日起 天内发货 |
| 有效期至： |
长期有效 |
| 最后更新： |
2012-03-12 10:05 |
| |
 |
|
|
marsh bellofram 过滤调压阀
| Type 50 & Type 50 NACE Filter Regulators |
| |
| Type 50 & Type 50 NACE Filter Regulators |
- Superior regulation characteristics
- Rugged, corrosion-resistant construction
- Excellent stability and repeatability
- Self-relieving
- Integral, 40 micron, self cleaning filter
- Low droop at high flow
- The Type 50 NACE is available for use in corrosive environments. This complies with NACE material requirement #MR0175 for sulfide stress cracking resistant metallic material for oil field equipment.
|
| |
| Product Detail: |
Marsh Bellofram’s General Purpose Type 50 & Type 50 NACE Filter Regulators are reliable precision units designed for instrumentation and general purpose use in both standard environments (Type 50), and corrosive environments (Type 50 NACE). The Type 50 NACE complies with NACE material requirement #MR-01-75 for sulfide stress cracking resistant metallic material for oil field equipment.
Test data for these regulators show excellent performance characteristics compared with those of similar units presently on the market. These Marsh Bellofram regulators are generally superior in regulated pressure vs. flow, forward-to-reverse flow offset, supply pressure sensitivity, repeatability and stability.
Ruggedly designed and constructed, the regulators have housings of diecast aluminum. The Type 50 Regulator is finished with vinyl paint (which resists scratching, weathering & other physical abuse), while the Type 50 NACE is finished with epoxy paint for added protection. Both models are pressure and leak tested prior to shipment from the factory.
Careful design and quality materials throughout assure long, trouble-free operation in the most difficult industrial environments. A rubberized, soft-seat valve stem provides positive shut-off and “forgives” dirt or other foreign matter. An aspirator maintains downstream pressure and compensates for droop when high flow occurs. The gauge port is convenient for gauge installation and can also be used as an additional full flow outlet. The Type 50 regulators include a unique self-cleaning 40 micron nylon mesh filter (316 stainless steel in the Type 50 NACE) that can be easily removed.
The design of these regulators is especially well suited to pilot-operated controllers, and instruments, as well as applications such as air chucks, air spray guns, air cylinders and actuators, and a wide range of industrial pneumatic systems and equipment. |
| Part Numbers: |
| |
Part Number |
Port Size |
Set Point Range |
| BAR |
psig |
| T50 |
960-062-000 |
1/4 NPT |
0-0.7 |
0-10 |
| 960-067-000 |
1/4 NPT |
0-2.1 |
0-30 |
| 960-068-000 |
1/4 NPT |
0-4.1 |
0-60 |
| 960-069-000 |
1/4 NPT |
0-8.3 |
0-120 |
| T50 NACE |
960-300-000 |
1/4 NPT |
0-2.1 |
0-30 |
| 960-301-000 |
1/4 NPT |
0-4.1 |
0-60 |
| 960-302-000 |
1/4 NPT |
0-8.3 |
0-120 |
| To order BSPT add "BSPT" to end of part number. |
|
| Options: |
| Replace the last three digits of the part number with digits from the table below. If more than 2 combination needed, Consult Factory. |
| OPTION |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
| 1 |
Fluorocarbon Pintle |
001 |
021 |
031 |
041 |
051 |
061 |
071 |
081 |
091 |
101 |
111 |
| 2 |
Non-Relieving |
|
002 |
032 |
042 |
052 |
|
|
082 |
092 |
|
112 |
| 3 |
Knob |
|
003 |
043 |
053 |
063 |
073 |
083 |
|
103 |
113 |
| 4 |
5 Micron Filter |
|
004 |
054 |
064 |
074 |
084 |
094 |
104 |
114 |
| 5 |
Epoxy Coating |
|
005 |
065 |
075 |
085 |
095 |
105 |
115 |
| 6 |
Tapped Vent |
|
006 |
076 |
086 |
096 |
106 |
116 |
| 7 |
Mounting Bracket |
|
007 |
087 |
097 |
107 |
117 |
| 8 |
Pressure Gauge |
|
008 |
098 |
108 |
118 |
| 9 |
Tamper Resistant Cover |
|
009 |
109 |
119 |
| 10 |
Soft Relief Seat |
|
010 |
110 |
| 11 |
Fluorocarbon Diaphragm |
|
011 |
Fluorocarbon Pintle: A special elastomeric pintle used where elements in the supply air, such as flame retardant synthetic lubricants, are particularly destructive to ordinary pintle material.
Non Relieving: Used in applications where it is desirable to relieve pressure downstream of the regulator, for some constant flow applications, and where the gas flowing through the regulator must not escape at the regulator. Non-relieving regulators should not be used for low or no flow applications.
Knob: Option to replace the square head pressure adjusting screw.
5 Micron Filter: Replaces the 40 micron filter supplied with the standard Type 50 for more complete air filtration.
Corrosive Resistant Epoxy Finish: An epoxy paint applied to the body and dripwell of the regulator exterior surfaces to provide increased corrosion resistance. (Standard with Type 50 NACE)
Tapped Vent: Allows installation of plumbing to capture exhaust air. (Standard with Type 50 NACE)
Mounting Bracket: TYPE 50: Steel (dichromate finish) bracket for side mounting.
TYPE 50 NACE: Stainless Steel bracket for side mounting.
Pressure Gauge: TYPE 50: Dual scale 2 in. (50.8 mm) gauges. Ranges include 0-30 psig (0-200 kPa), 0-60 psig (0-400 kPa), 0-100 psig (0-700 kPa) and 0-160 psig (0-1100 kPa). When specified with regulator, the correct range will be supplied.
TYPE 50 NACE: A dual scale, 0-60 psig (0-400 kPa) P/N 625-000-016, or 0-200 psig (0-1400 kPa)
P/N 625-000-018, 2.47" diameter (63mm) stainless steel pressure gauge is available and must be ordered separately. NOTE: Although the case is stainless steel, the internal components are not made of NACE qualified materials.
Tamper Resistant Cover: An aluminum tubular cover placed over a slotted head adjusting screw and screwed onto the bonnet of the regulator with a wrench. Prevents ordinary hand adjustments. Supplied with an o-ring that is designed to seal the adjusting screw threads in capture bleed applications.
Soft Relief Seat: Used in applications where it is desirable to reduce the standard bleed rate from 6 SCFH [0.17 m3hr] to less than 0.1 SCFH [0.003 m3hr]. (Not available with Type 50 NACE)
Fluorocarbon Diaphragm: Diaphragm as well as all seals are made of fluorocarbon elastomer to prevent deterioration from elements in the air supply, such as flame retardant synthetic lubricants normally destructive to standard Buna-N material.
|
|
|
|
| |
|
| |
|
